Augtek

Contents

LORIOT Gateway Software download

For general setup instructions, see the Basic Setup page.

LORIOT Gateway self-extracting installer

Once connected to the gateway with an SSH console run the following commands:

• cd /tmp
• wget https://example.loriot.io/home/gwsw/loriot-augtek-augtek-augtek-SPI-0-latest.sh -O loriot-install.sh
• chmod +x loriot-install.sh
• ./loriot-install.sh -f

LORIOT Gateway binary only

Once connected to the gateway with an SSH console run the following commands:

• cd /tmp
• wget https://example.loriot.io/home/gwsw/loriot-augtek-augtek-augtek-SPI-0-latest.bin -O loriot-gw
• chmod +x loriot-gw
• ./loriot-gw -f

Installation steps

You will need SSH / SCP to your Augtek gateway to perform the following steps.

• Set the time on the gateway to the current time using the date command, for example date 012618002016 (January 26th 2016, 18:00)
• Write the time to the hardware clock using hwclock -w
• Please make sure that no other process is accessing the SX1301, otherwise the binary might fail to start or will only receive a subset of all the packets.
• Use the command of the Quick install on your gateway page.

Runtime Notes

The gateway binary is designed to be completely self contained, and not to modify your gateway image / environment.

It doesn't write any files, and after a successful start, the gateway process will demonize and run in background.