LORIOT Gateway Software Changelog:


New features:

  • Multi-antenna support on multi-antenna gateways
  • Duty cycle tracking for downlinks
  • Added Dragino LG308 gateway integration
  • Added Ursalink UG85 gateway integration


Improvements:

  • Add Tektelic HAL V3.5.45.1
  • Hardware reset of RAK 7249
  • GPS handling on Ursalink UG87
  • GPS handling on Multitech Conduits

New features:

  • Disable spectral scan by default
  • Added RAK 7249 gateway integration
  • Added Kerlink Femtocell Evolution gateway integration
  • Added Kerlink iStation gateway integration
  • Added Multitech V2 (**270) gateway integration

Improvements:

  • Boot up on Ursalink UG87
  • Boot up on Robustel R3000
  • GPS data handling
  • Spectral scan buffering
  • Class B auto beacon handling

New features:

  • Added RFI engineering gateway integration
  • Added Ursalink UG87 gateway integration
  • Added command line parameter to adjust reconnection delay
  • Added newly released public servers
  • Added Robustel gateway integration
  • Basic support for Pico gateway HAL
  • Added Class B autonomous beacon support
  • Support for latest Lorix gateway Operating System

Improvements:

  • Network handling on Tektelic gateways
  • Multicast message handling
  • Location data service to server
  • Log message printing
  • Downlink scheduling
  • Unified uplink metadata from different Semtech hardware versions
  • V2 radio board handling
  • Certificate handling with c command line flag
  • Geolocation support for Outdoor Tektelic gateways

New features:

  • New mechanism for uplink retransmission during outages of connection to Network Server
  • Keep-alive routine to help keep up the internet connection (useful for 3G/4G-based gateways)
  • Option to watch gateway's network connectivity and reboot the gateway when network is down

Improvements:

  • Integrated Semtech V1 HAL 5.0.1
  • Integrated Kerlink V2 HAL 61
  • Support Raspberry Pi based gateways running Debian Stretch
  • Report GPS location on RisingHF, Gemtek outdoor and Tektelic Macro/Mega gateways
  • SPI-connected concentrators now check if SPI device is in use before gateway start

Installer improvements:

  • Cisco IXM900 (2.0.10, 2.0.30)
  • Multitech AEP (1.4.17, 1.6.2)
  • Lorix One

New gateways:

  • RisingHF Indoor
  • Option Cloudgate
  • Tektelic Micro
  • Fix Multitech SPI target
  • Integrate HAL v3.5.20 for Tektelic Kona Macro/Mega
  • Support for additional external SSL certificate
  • Improve installer for Cisco IXM 2.0.10 (MAC address)
  • Improve installer for GIOT (Gemtek Femtocell)
  • Rpi: add command line parameter to override default reset pin
  • Improved MultiTech SPI support
  • New Tektelic V2 HAL
  • Patched and cleaned HAL files
  • Cleaned up build for V1
  • Cleaned up build for V2
  • Kerlink v58 and v61 timestamping fixed
  • Improved Kerlink V2 support
  • Improved Tektelic V2 support
  • Kona gateway support
  • TLS close socket on conneciton error
  • Kerlink V2 for 3.1.2 firmware
  • Backup interface when network unreachable
  • Cisco V2 start delay added
  • Openssl verison Log
  • New AP server added on the binary
  • Loriot start script review
  • SSL server hostname correction
  • Embit gw use HAL 4
  • Multitech AP use HAL 4
  • Log added on HAL
  • New AP server added on the binary
  • Loriot start script review
  • SSL server hostname correction
  • Embit gw use HAL 4
  • Multitech AP use HAL 4
  • Log added on HAL
  • Cisco V1 build correction
  • Out of index correction Scan and uplink
  • Cisco V2 support
  • Log file rotation correction and binary version logged
  • FTDI error print on mpsse lib
  • Haxiot gateway integration
  • Kerlink sporadic issue with -O2 build fix
  • GPS information send each hour
  • Comtact TW_SWAP_IQ to 0 for downlink
  • Log to syslog and /var/log when allowded
  • Lib mpsse build staticly for RaspberryPi binary
  • Defaut install folder set for Kerlink gateway
  • loriot-gw set to be an auto-restart script for the binary
  • Embit gateway spi support with HAL 4.0.0
  • HAL error are log
  • Gateway support added for Comtac KerlinkFemto Laird
  • Read embedded calibration file on supported gateway
  • Correct websocket close code issue
  • Installer files owner is root:root
  • Kerlink build with static openssl library 1.0.2g
  • Multitech reduce HAL poll to minimum 40ms due to USB latency
  • Thread protection with HAL
  • Reduce CPU load on multitech gateway
  • Add more mutex procteciton for slow USB to SPI device like mCard
  • Binary can be compile with specific default server and extra certificate
  • GPS position and statelite information are send to server
  • Output interface can be set as a coma separated interface list for failvoer interface
  • Network output interface selection with -i parameter
  • Installer as self extract Bash script
  • Support for V2 gateway (Kerlink, Aartesys)
  • Loriot certificate embeded in binary
  • External library needed for some gateway are staticly link
  • Integration patch for version Multiech AEP version 1.3.2
  • Log and PID file are created on /tmp folder
  • LoRa HAL 4.1.3
  • Gateway failover go back to default interface
  • Binary improvement with state machine
  • Automatic update create a copy of previous binary
  • Binary check if it is not run twice for the same server