Installation - Community Network Servers
Installation ➜ The WIFX LORIX One gateway has a built-in script which handles different cloud providers' packet forwarders. Lorix
✔ The LORIX One supports LORIOT's public servers the LORIOT Community Servers out of the box.
✔ Our binary is pre-installed at /opt/lorix/clouds/loriot.
Installation steps (private servers only)
For private serversTo connect the gateway on the Community Network Servers simply follow these steps:
a) Log in to the User Interface and select or create a Network
b) Select Add a Gateway and select the LORIX One.
c) Enter the Gateway eth0 MAC address, location and select Register LORIX One gateway:
d) Connect your LORIX One gateway to the internet and it will connect to the server and show its status as Online.
✔ The gateway is now connected to the server and can start routing LoRaWAN device transmissions.
Migrating the LORIX One to the Professional Public Server
➜ For the Professional Public Server, the gateway must be configured to connect with LORIOT in five simple stepsre-configured:
a) Run theself-extracting
installer script found on the dashboardas described in Basic InstallationConnect to the gateway via SSH and edit
OPTIONS="-f -s <PPS address>"`cat $RUNDIR/options`
e) Save and exitrestart
f) Restart the gateway
|Further information about Lorix One gateway can be found in its user manual which can be downloaded from https://lorixone.io|
Migrate LorixOne gateways from public server to PPS
Installation - Private Network Server
➜ For private servers, the gateway must be configured to connect with LORIOT in five simple steps:
a) Run the self-extracting installer found on the dashboard as described in Basic Installation
b) Connect to the gateway via SSH and edit
d) Save and exitrestart
e) Restart the gateway
|Further documentation on the LORIX One gateway can be found in the user manual which can be downloaded at https://lorixone.io|